#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
proc_sorting="memory"
#* Reverse sorting order, True or False.
proc_reversed=False
#* Show processes as a tree.
proc_tree=False
#* Use the cpu graph colors in the process list.
proc_colors=True
#* Use a darkening gradient in the process list.
proc_gradient=True
#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
proc_per_core=False
#* Show process memory as bytes instead of percent.
proc_mem_bytes=True
#* Show cpu graph for each process.
proc_cpu_graphs=True
#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
proc_info_smaps=False
#* Show proc box on left side of screen instead of right.
proc_left=True
#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
proc_filter_kernel=True
#* In tree-view, always accumulate child process resources in the parent process.
proc_aggregate=False
#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
#* Select from a list of detected attributes from the options menu.
cpu_graph_upper="total"
#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
#* Select from a list of detected attributes from the options menu.
cpu_graph_lower="total"
#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
show_gpu_info="Auto"
#* Toggles if the lower CPU graph should be inverted.
cpu_invert_lower=True
#* Set to True to completely disable the lower CPU graph.
cpu_single_graph=False
#* Show cpu box at bottom of screen instead of top.
cpu_bottom=False
#* Shows the system uptime in the CPU box.
show_uptime=True
#* Show cpu temperature.
check_temp=True
#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
cpu_sensor="Auto"
#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
show_coretemp=True
#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
#* Example: "4:0 5:1 6:3"
cpu_core_map=""
#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
temp_scale="celsius"
#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
base_10_sizes=True
#* Show CPU frequency.
show_cpu_freq=True
#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
clock_format="%X"
#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
background_update=True
#* Custom cpu model name, empty string to disable.
custom_cpu_name=""
#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
disks_filter="exclude=/boot/boot/efi"
#* Show graphs instead of meters for memory values.
mem_graphs=True
#* Show mem box below net box instead of above.
mem_below_net=False
#* Count ZFS ARC in cached and available memory.
zfs_arc_cached=True
#* If swap memory should be shown in memory box.
show_swap=True
#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
swap_disk=False
#* If mem box should be split to also show disks info.
show_disks=True
#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
only_physical=True
#* Read disks list from /etc/fstab. This also disables only_physical.
use_fstab=True
#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
zfs_hide_datasets=False
#* Set to true to show available disk space for privileged users.
disk_free_priv=False
#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
show_io_stat=True
#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
io_mode=False
#* Set to True to show combined read/write io graphs in io mode.
io_graph_combined=False
#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
#* Example: "/mnt/media:100 /:20 /boot:1".
io_graph_speeds=""
#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
net_download=100
net_upload=100
#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
net_auto=True
#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
net_sync=True
#* Starts with the Network Interface specified here.
net_iface=""
#* Show battery stats in top right if battery is present.
show_battery=True
#* Which battery to use if multiple are present. "Auto" for auto detection.
selected_battery="Auto"
#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
log_level="WARNING"
#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
nvml_measure_pcie_speeds=True
#* Horizontally mirror the GPU graph.
gpu_mirror_graph=True
#* Custom gpu0 model name, empty string to disable.
custom_gpu_name0=""
#* Custom gpu1 model name, empty string to disable.
custom_gpu_name1=""
#* Custom gpu2 model name, empty string to disable.
custom_gpu_name2=""
#* Custom gpu3 model name, empty string to disable.
custom_gpu_name3=""
#* Custom gpu4 model name, empty string to disable.
custom_gpu_name4=""
#* Custom gpu5 model name, empty string to disable.
